|
Hardy Page 1 - Weigh Systems
|
[ go to
page
2
of Hardy Instruments ] |
[ go to
page 3
of Hardy Instruments ] |
Process Weighing
Does your current
weighing system…
• Ignore vibration around scales while still providing fast,
accurate weight readings?
• Allow system calibration in seconds without test weights?
• Plug directly into your PLC rack with no additional wired
communications?
If it doesn't, it's time to upgrade to Hardy Instruments'
Process Weighing Products.
|
 |
4000 Series Process Weight Controller…
the HI 4050 acts
as a front end to a PLC, PC or DCS system for most weighing
applications, or as a stand-alone instrument for simple control
or weight monitoring. |
|
3000
Series Multi-Scale Weight Controller…
the HI 3030 can monitor and control up to 4 scales
simultaneously while communicating via EtherNet/IP, DeviceNet,
ControlNet, Allen-Bradley Remote I/O, Modbus over EtherNet or
Profibus to the rest of your system. |
 |
|
 |
3000
Filler/Dispenser Controllers… the Hi
3010 monitors and controls filling or dispensing operations as a
stand-alone instrument or while communicating results to your
control system. |
|
Hardy Weigh Modules…. Specifically
designed for Allen-Bradley PLC’s, including…
- •CompactLogix/MicroLogix…
HI 1769WS & HI 1769-2WS, single and dual scale modules
- •ControLogix…
HI 1756WS & HI 1756-2WS, single and dual scale modules
- •SLC500…
HI 1746WS, single scale module
- •PLC5…
HI 1771WS, single scale module
|
 |
|
|
DeviceNet
Weigh Module… HI 200DNWM designed
specifically to the DeviceNet open network standard |
|
Hardy’s
Loss-In-Weight Rate Controller… the HI
2160RC+ is used to retrofit volumetric feeders or replace
outdated controllers on gravimetric feed systems. |
 |
|
 |
AnyWeigh
Bench Scales… communicate with a mV/V
signal to any Hardy weigh instrument, with an integral 4-20 mAdc
output or via an integral DeviceNet communications port. |
|
AnyWeigh
Floor Scales… 1000 to 10,000 lb
capacity, sized from 30-in x 30-in to 6-ft x 8-ft. Specials and
accessory items are available. |
 |
|
 |
Advantage Matched Load Cell Systems…
3-leg & 4-leg systems, compression or tension, capacities from
45-lbs to 200,000-lbs per cell, includes C2 Electronic
Calibration technology & 200% overweight protection. |
For more Information on Weighing
Systems, visit…
www.hardyinst.com
home |
welcome |
about us |
product line
|
contact us |
featured products
|
current news
|
